dmesg - Law CLI on ODROID-XU4 running Debian Jessie ARMHF SSD
[c0] Booting Linux on physical CPU 0x100
[c0] Initializing cgroup subsys cpuset
[c0] Initializing cgroup subsys cpu
[c0] Initializing cgroup subsys cpuacct
[c0] Linux version 3.10.96+ (root@oloh-support) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Mar 15 10:16:47 AWST 2016
[c0] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d
[c0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[c0] Machine: ODROID-XU3, model: Hardkernel odroid-xu3 board based on EXYNOS5422
[c0] ION: Contiguous 0x6650000 bytes @ 0x0 defined for 0:common
[c0] ION: Contiguous 0x400000 bytes @ 0x0 defined for 2:mfc_sh
[c0] ION: Contiguous 0x800000 bytes @ 0x0 defined for 10:g2d_wfd
[c0] ION: Contiguous 0x6000000 bytes @ 0x0 defined for 11:video
[c0] ION: Contiguous 0x1000000 bytes @ 0x0 defined for 7:mfc_input
[c0] ION: Contiguous 0x400000 bytes @ 0x0 defined for 9:sectbl
[c0] ION: Contiguous 0x400000 bytes @ 0x0 defined for 8:mfc_fw
[c0] ION: Contiguous 0x400000 bytes @ 0x0 defined for 12:mfc_nfw
[c0] ION: Contiguous 0x400000 bytes @ 0x0 defined for 13:secdma
[c0] cma: CMA: reserved 104 MiB at b8000000
[c0] cma: CMA: reserved 4 MiB at b7c00000
[c0] cma: CMA: reserved 8 MiB at b7400000
[c0] cma: CMA: reserved 96 MiB at b1400000
[c0] cma: CMA: reserved 16 MiB at b0400000
[c0] cma: CMA: reserved 4 MiB at b0000000
[c0] cma: CMA: reserved 4 MiB at afc00000
[c0] cma: CMA: reserved 4 MiB at af800000
[c0] cma: CMA: reserved 4 MiB at af400000
[c0] cma: CMA: reserved 256 MiB at 5f800000
[c0] Memory policy: ECC disabled, Data cache writealloc
[c0] create_mapping_memory: section: 40000000 ~ 6f800000
[c0] CPU EXYNOS5422 (id 0xe5422001)
[c0] On node 0 totalpages: 518656
[c0] free_area_init_node: node 0, pgdat c0980540, node_mem_map c0dee000
[c0] Normal zone: 1520 pages used for memmap
[c0] Normal zone: 0 pages reserved
[c0] Normal zone: 194560 pages, LIFO batch:31
[c0] HighMem zone: 2532 pages used for memmap
[c0] HighMem zone: 324096 pages, LIFO batch:31
[c0] PERCPU: Embedded 9 pages/cpu @c1dfc000 s14912 r8192 d13760 u36864
[c0] pcpu-alloc: s14912 r8192 d13760 u36864 alloc=9*4096
[c0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[c0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517136
[c0] Kernel command line: console=tty0 console=ttySAC2,115200n8 root=/dev/sda1 rootwait ro fsck.repair=yes net.ifnames=0 governor=performance hdmi_tx_amp_lvl=31 hdmi_tx_lvl_ch0=3 hdmi_tx_lvl_ch1=3 hdmi_tx_lvl_ch2=3 hdmi_tx_emp_lvl=6 hdmi_clk_amp_lvl=31 hdmi_tx_res=0 HPD=true vout=dvi
[c0] hdmi: using DVI Mode
[c0] PID hash table entries: 4096 (order: 2, 16384 bytes)
[c0] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[c0] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[c0] allocated 4149248 bytes of page_cgroup
[c0] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[c0] Memory: 2026MB = 2026MB total
[c0] Memory: 1526176k/1526176k available, 548448k reserved, 1046528K highmem
[c0] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc08a500c (8821 kB)
.init : 0xc08a6000 - 0xc090fa40 ( 423 kB)
.data : 0xc0910000 - 0xc098484c ( 467 kB)
.bss : 0xc098484c - 0xc0dedc64 (4518 kB)
[c0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[c0] Preemptible hierarchical RCU implementation.
[c0] NR_IRQS:16 nr_irqs:16 16
[c0] apll 800000000
[c0] bpll 825000000
[c0] cpll 666000000
[c0] dpll 600000000
[c0] epll 180633609
[c0] rpll 66000000
[c0] ipll 432000000
[c0] spll 800000000
[c0] dout_spll_ctrl_div2 400000000
[c0] vpll 400000000
[c0] mpll 532000000
[c0] Clock enables : TOP, MIF
[c0] mmc0: dout_mmc0 666000000
[c0] mmc1: dout_mmc1 800000000
[c0] mmc2: dout_mmc2 666000000
[c0] scaler: dout_aclk_400_mscl 333000000 aclk_400_mscl 333000000
[c0] [g2d_init_clock:319] aclk_333_g2d:333000000
[c0] gscaler: dout_aclk_300_gscl 300000000 aclk_300_gscl 300000000
[c0] [jpeg_clock_init:374]jpeg: dout_aclk_300_jpeg 300000000 aclk_300_jpeg 300000000
[c0] mfc: aclk_333 400000000
[c0] Exynos5422: clock setup completed
[c0] Exynos: pwm: clock setup completed
[c0] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[c0] Switching to timer-based delay loop
[c0] EXYNOS5422 PMU Initialize
[c0] Console: colour dummy device 80x30
[c0] console [tty0] enabled
[c0] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[c0] ... MAX_LOCKDEP_SUBCLASSES: 8
[c0] ... MAX_LOCK_DEPTH: 48
[c0] ... MAX_LOCKDEP_KEYS: 8191
[c0] ... CLASSHASH_SIZE: 4096
[c0] ... MAX_LOCKDEP_ENTRIES: 16384
[c0] ... MAX_LOCKDEP_CHAINS: 32768
[c0] ... CHAINHASH_SIZE: 16384
[c0] memory used by lock dependency info: 3679 kB
[c0] per task-struct memory footprint: 1152 bytes
[c0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000)
[c0] pid_max: default: 32768 minimum: 301
[c0] Mount-cache hash table entries: 512
[c0] Initializing cgroup subsys debug
[c0] Initializing cgroup subsys memory
[c0] Initializing cgroup subsys devices
[c0] Initializing cgroup subsys freezer
[c0] Initializing cgroup subsys blkio
[c0] Initializing cgroup subsys perf_event
[c0] CPU: Testing write buffer coherency: ok
[c0] ftrace: allocating 22460 entries in 66 pages
[c0] /cpus/cpu@0 missing clock-frequency property
[c0] /cpus/cpu@1 missing clock-frequency property
[c0] /cpus/cpu@2 missing clock-frequency property
[c0] /cpus/cpu@3 missing clock-frequency property
[c0] /cpus/cpu@4 missing clock-frequency property
[c0] /cpus/cpu@5 missing clock-frequency property
[c0] /cpus/cpu@6 missing clock-frequency property
[c0] /cpus/cpu@7 missing clock-frequency property
[c0] CPU0: thread -1, cpu 0, socket 1, mpidr 80000100
[c0] Running under secure firmware.
[c0] Setting up static identity map for 0xc0626248 - 0xc06262a0
[c0] Exynos-SnapShot: exynos_ss_init failed
[c0] ftrace: Allocated trace_printk buffers
[c0] cpu1: SWRESET
[c1] CPU1: Booted secondary processor
[c1] CPU1: thread -1, cpu 1, socket 1, mpidr 80000101
[c0] cpu2: SWRESET
[c2] CPU2: Booted secondary processor
[c2] CPU2: thread -1, cpu 2, socket 1, mpidr 80000102
[c0] cpu3: SWRESET
[c3] CPU3: Booted secondary processor
[c3] CPU3: thread -1, cpu 3, socket 1, mpidr 80000103
[c4] CPU4: Booted secondary processor
[c4] CPU4: thread -1, cpu 0, socket 0, mpidr 80000000
[c5] CPU5: Booted secondary processor
[c5] CPU5: thread -1, cpu 1, socket 0, mpidr 80000001
[c6] CPU6: Booted secondary processor
[c6] CPU6: thread -1, cpu 2, socket 0, mpidr 80000002
[c7] CPU7: Booted secondary processor
[c7] CPU7: thread -1, cpu 3, socket 0, mpidr 80000003
[c0] Brought up 8 CPUs
[c0] SMP: Total of 8 processors activated (384.00 BogoMIPS).
[c0] CPU: All CPU(s) started in HYP mode.
[c0] CPU: Virtualization extensions available.
[c0] devtmpfs: initialized
[c6] sched: registering cpufreq notifiers for scale-invariant loads
[c6] pinctrl core: initialized pinctrl subsystem
[c6] regulator-dummy: no parameters
[c6] NET: Registered protocol family 16
[c6] DMA: preallocated 256 KiB pool for atomic coherent allocations
[c6] gpiochip_add: registered GPIOs 0 to 7 on device: gpy7
[c6] gpiochip_add: registered GPIOs 8 to 15 on device: gpx0
[c6] gpiochip_add: registered GPIOs 16 to 23 on device: gpx1
[c6] gpiochip_add: registered GPIOs 24 to 31 on device: gpx2
[c6] gpiochip_add: registered GPIOs 32 to 39 on device: gpx3
[c6] gpiochip_add: registered GPIOs 40 to 47 on device: gpc0
[c6] gpiochip_add: registered GPIOs 48 to 55 on device: gpc1
[c6] gpiochip_add: registered GPIOs 56 to 62 on device: gpc2
[c6] gpiochip_add: registered GPIOs 63 to 66 on device: gpc3
[c6] gpiochip_add: registered GPIOs 67 to 68 on device: gpc4
[c6] gpiochip_add: registered GPIOs 69 to 76 on device: gpd1
[c6] gpiochip_add: registered GPIOs 77 to 82 on device: gpy0
[c6] gpiochip_add: registered GPIOs 83 to 86 on device: gpy1
[c6] gpiochip_add: registered GPIOs 87 to 92 on device: gpy2
[c6] gpiochip_add: registered GPIOs 93 to 100 on device: gpy3
[c6] gpiochip_add: registered GPIOs 101 to 108 on device: gpy4
[c6] gpiochip_add: registered GPIOs 109 to 116 on device: gpy5
[c6] gpiochip_add: registered GPIOs 117 to 124 on device: gpy6
[c6] gpiochip_add: registered GPIOs 125 to 132 on device: gpe0
[c6] gpiochip_add: registered GPIOs 133 to 134 on device: gpe1
[c6] gpiochip_add: registered GPIOs 135 to 140 on device: gpf0
[c6] gpiochip_add: registered GPIOs 141 to 148 on device: gpf1
[c6] gpiochip_add: registered GPIOs 149 to 156 on device: gpg0
[c6] gpiochip_add: registered GPIOs 157 to 164 on device: gpg1
[c6] gpiochip_add: registered GPIOs 165 to 166 on device: gpg2
[c6] gpiochip_add: registered GPIOs 167 to 170 on device: gpj4
[c6] gpiochip_add: registered GPIOs 171 to 178 on device: gpa0
[c6] gpiochip_add: registered GPIOs 179 to 184 on device: gpa1
[c6] gpiochip_add: registered GPIOs 185 to 192 on device: gpa2
[c6] gpiochip_add: registered GPIOs 193 to 197 on device: gpb0
[c6] gpiochip_add: registered GPIOs 198 to 202 on device: gpb1
[c6] gpiochip_add: registered GPIOs 203 to 206 on device: gpb2
[c6] gpiochip_add: registered GPIOs 207 to 214 on device: gpb3
[c6] gpiochip_add: registered GPIOs 215 to 216 on device: gpb4
[c6] gpiochip_add: registered GPIOs 217 to 224 on device: gph0
[c6] gpiochip_add: registered GPIOs 225 to 231 on device: gpz
[c6] syscon 10040000.system-controller: regmap [mem 0x10040000-0x10044fff] registered
[c6] syscon 10050000.syscon: regmap [mem 0x10050000-0x10054fff] registered
[c6] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[c6] hw-breakpoint: maximum watchpoint size is 8 bytes.
[c6] S3C Power Management, Copyright 2004 Simtec Electronics
[c6] PM DOMAIN: pd-cam has a new child pd-isp.
[c6] PM DOMAIN: pd-gscl has a new child pd-cam.
[c6] EXYNOS5: PM Domain Initialize
[c6] pd-gscl - on
[c6] pd-isp - on
[c6] pd-mfc - on
[c6] pd-g3d - on, always
[c6] pd-disp1 - on, always
[c6] pd-maudio - on
[c6] pd-g2d - on, always
[c6] pd-mscl - on
[c6] pd-fsys - on, always
[c6] pd-psgen - on, always
[c6] pd-peric - on, always
[c6] pd-wcore - on, always
[c6] pd-cam - on
[c6] EXYNOS: Initializing architecture
[c6] exynos-sysmmu 10a60000.sysmmu: --> 10850000.fimg2d
[c6] exynos-sysmmu 10a60000.sysmmu: [OK]
[c6] exynos-sysmmu 10a70000.sysmmu: --> 10850000.fimg2d
[c6] exynos-sysmmu 10a70000.sysmmu: [OK]
[c6] exynos-sysmmu 14650000.sysmmu: --> 14450000.mixer
[c6] exynos-sysmmu 14650000.sysmmu: [OK]
[c6] exynos-sysmmu 13e80000.sysmmu: --> 13e00000.gsc
[c6] exynos-sysmmu 13e80000.sysmmu: [OK]
[c6] exynos-sysmmu 13e90000.sysmmu: --> 13e10000.gsc
[c6] exynos-sysmmu 13e90000.sysmmu: [OK]
[c6] exynos-sysmmu 12880000.sysmmu: --> 12800000.scaler
[c6] exynos-sysmmu 12880000.sysmmu: [OK]
[c6] exynos-sysmmu 12890000.sysmmu: --> 12810000.scaler
[c6] exynos-sysmmu 12890000.sysmmu: [OK]
[c6] exynos-sysmmu 128a0000.sysmmu: --> 12820000.scaler
[c6] exynos-sysmmu 128a0000.sysmmu: [OK]
[c6] exynos-sysmmu 128c0000.sysmmu: --> 12800000.scaler
[c6] exynos-sysmmu 128c0000.sysmmu: [OK]
[c6] exynos-sysmmu 128d0000.sysmmu: --> 12810000.scaler
[c6] exynos-sysmmu 128d0000.sysmmu: [OK]
[c6] exynos-sysmmu 128e0000.sysmmu: --> 12820000.scaler
[c6] exynos-sysmmu 128e0000.sysmmu: [OK]
[c6] exynos-sysmmu 11f10000.sysmmu: --> 11f50000.jpeg
[c6] exynos-sysmmu 11f10000.sysmmu: [OK]
[c6] exynos-sysmmu 11f20000.sysmmu: --> 11f60000.jpeg
[c6] exynos-sysmmu 11f20000.sysmmu: [OK]
[c6] exynos-sysmmu 11200000.sysmmu: --> 11000000.mfc
[c6] exynos-sysmmu 11200000.sysmmu: [OK]
[c6] exynos-sysmmu 11210000.sysmmu: --> 11000000.mfc
[c6] exynos-sysmmu 11210000.sysmmu: [OK]
[c6] exynos-sysmmu 14640000.sysmmu: --> 14400000.fimd
[c6] exynos-sysmmu 14640000.sysmmu: [OK]
[c6] exynos-sysmmu 14680000.sysmmu: --> 14400000.fimd
[c6] exynos-sysmmu 14680000.sysmmu: [OK]
[c6] CPU Info : Samsung Exynos5422 Soc is BIN1
[c6] Exynos5422 ASV : Use Fusing Speed Group 4
[c6] Exynos5422 ASV : invalid IDS value
[c6] EXYNOS5422 ASV : IDS : 0 HPM : 0
[c6] VDD_ARM ASV group is 4
[c6] VDD_KFC ASV group is 4
[c6] VDD_INT ASV group is 4
[c6] VDD_MIF ASV group is 4
[c6] VDD_G3D ASV group is 4
[c6] VDD_ISP ASV group is 4
[c7] bio: create slab at 0
[c7] of_get_named_gpio_flags exited with status 119
[c7] VUSB_BOOST_5V: 5000 mV
[c7] of_get_named_gpio_flags: can't parse gpios property
[c7] MAIN_DC: no parameters
[c7] of_get_named_gpio_flags: can't parse gpios property
[c7] hdmi-en: no parameters
[c7] SCSI subsystem initialized
[c7] usbcore: registered new interface driver usbfs
[c7] usbcore: registered new interface driver hub
[c7] usbcore: registered new device driver usb
[c4] vdd_mif: 700 1300 mV at 1100 mV
[c4] vdd_eagle: 800 1500 mV at 1000 mV
[c4] vdd_int: 800 1400 mV at 1000 mV
[c4] vdd_g3d: 700 1400 mV at 1000 mV
[c4] vdd_kfc: 800 1500 mV at 1025 mV
[c4] vddf_2v85: 3300 mV
[c4] vdd_adc: 1800 mV
[c4] vdd_pll: 1800 mV
[c4] vdd_ldo6: 1000 mV
[c4] vdd_ldo7: 1800 mV
[c4] vdd_ldo8: 1800 mV
[c4] vdd_ldo9: 3300 mV
[c4] vdd_ldo10: 1800 mV
[c4] vdd_ldo11: 1000 mV
[c4] vdd_ldo13: 1800 3300 mV at 3300 mV
[c4] vdd_ldo15: 3300 mV
[c4] vdd_eth: 3300 mV
[c4] vdd_ldo18: 1850 mV
[c4] vdd_ldo19: 2800 3300 mV at 3300 mV
[c4] vdd_mifs: 800 1100 mV at 1100 mV
[c4] vdd_ldo26: 3000 mV
[c4] vdd_g3ds: 800 1100 mV at 1000 mV
[c4] vdd_ldo28: 3300 mV
[c4] of_get_named_gpio_flags exited with status 177
[c4] of_get_named_gpio_flags exited with status 178
[c4] i2c-gpio i2c_gpio.8: using pins 177 (SDA) and 178 (SCL)
[c4] s3c-i2c 12c60000.i2c: slave address 0x00
[c6] s3c-i2c 12c60000.i2c: i2c-3: S3C I2C adapter
[c6] s3c-i2c 12c70000.i2c: slave address 0x00
[c6] s3c-i2c 12c70000.i2c: i2c-4: S3C I2C adapter
[c6] media: Linux media interface: v0.10
[c6] Linux video capture interface: v2.00
[c7] IOVMMU: Created debugfs entry at debugfs/iovmm
[c7] Advanced Linux Sound Architecture Driver Initialized.
[c7] PM DOMAIN: pd-maudio, Device : 3810000.lpass Registered
[c7] Samsung Low Power Audio Subsystem driver, (c)2013 Samsung Electronics
[c7] Loading modules backported from Linux version next-20150222-0-g53e418f1
[c7] Backport integrated by backports.git backports-20150222-0-g2745ccd
[c7] Switching to clocksource mct-frc
[c7] NET: Registered protocol family 2
[c7] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[c7] TCP bind hash table entries: 8192 (order: 6, 294912 bytes)
[c7] TCP: Hash tables configured (established 8192 bind 8192)
[c7] TCP: reno registered
[c7] UDP hash table entries: 512 (order: 3, 40960 bytes)
[c7] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)
[c7] NET: Registered protocol family 1
[c7] bounce pool size: 64 pages
[c7] VFS: Disk quotas dquot_6.5.2
[c7] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[c7] ROMFS MTD (C) 2007 Red Hat, Inc.
[c7] msgmni has been set to 1448
[c7] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[c7] io scheduler noop registered
[c7] io scheduler deadline registered
[c7] io scheduler cfq registered (default)
[c7] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-241330
[c7] dma-pl330 10800000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
[c7] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-241330
[c7] dma-pl330 121a0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[c7] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-241330
[c7] dma-pl330 121b0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[c7] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330
[c7] dma-pl330 3880000.adma: DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6
[c7] console [ttySAC2] enabled
[c7] [drm] Initialized drm 1.1.0 20060810
[c7] of_get_named_gpio_flags exited with status 39
[c7] PM DOMAIN: spd-gscl0, Device : 13e00000.gsc Registered
[c7] exynos-drm-gsc 13e00000.gsc: exynos-iommu gpd_dev_ops inserted!
[c7] exynos-drm-gsc 13e00000.gsc: drm gsc registered successfully.
[c7] PM DOMAIN: spd-gscl1, Device : 13e10000.gsc Registered
[c7] exynos-drm-gsc 13e10000.gsc: exynos-iommu gpd_dev_ops inserted!
[c7] exynos-drm-gsc 13e10000.gsc: drm gsc registered successfully.
[c7] exynos-drm-ipp exynos-drm-ipp: drm ipp registered successfully.
[c7] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[c7] [drm] No driver support for vblank timestamp query.
[c7] exynos-mixer 14450000.mixer: probe start
[c7] exynos-drm exynos-drm: bound 14450000.mixer (ops mixer_component_ops)
[c7] exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_component_ops)
[c7] Console: switching to colour frame buffer device 240x67
[c7] exynos-drm exynos-drm: fb0: frame buffer device
[c7] exynos-drm exynos-drm: registered panic notifier
[c7] [drm] Initialized exynos 1.0.0 20110530 on minor 0
[c7] mali 11800000.mali: Continuing without Mali clock control
[c7] hrtimer: interrupt took 119000 ns
[c7] mali 11800000.mali: GPU identified as 0x0620 r0p1 status 0
mali 11800000.mali: Probed as mali0
[c7] loop: module loaded
[c7] tun: Universal TUN/TAP device driver, 1.6
[c7] tun: (C) 1999-2004 Max Krasnyansky
[c7] usbcore: registered new interface driver rtl8150
[c7] usbcore: registered new interface driver r8152
[c7] of_get_named_gpio_flags exited with status 48
[c7] of_get_named_gpio_flags exited with status 37
[c7] of_get_named_gpio_flags exited with status 17
[c7] of_get_named_gpio_flags exited with status 36
[c7] dwc3 12400000.dwc3: dwc3_otg address space is not supported
[c7] dwc3 12400000.dwc3: Binding gadget dwc3-gadget
[c7] dwc3 12400000.dwc3: Turn on host
[c7] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[c7] ehci-s5p: EHCI s5p driver
[c7] of_get_named_gpio_flags exited with status 121
[c7] s5p-ehci 12110000.usb: EHCI Host Controller
[c7] s5p-ehci 12110000.usb: new USB bus registered, assigned bus number 1
[c7] s5p-ehci 12110000.usb: irq 103, io mem 0x12110000
[c7] s5p-ehci 12110000.usb: USB 2.0 started, EHCI 1.00
[c7] hub 1-0:1.0: USB hub found
[c7] hub 1-0:1.0: 3 ports detected
[c7] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[c7] exynos-ohci 12120000.usb: EXYNOS OHCI Host Controller
[c7] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2
[c7] exynos-ohci 12120000.usb: irq 103, io mem 0x12120000
[c7] hub 2-0:1.0: USB hub found
[c7] hub 2-0:1.0: 3 ports detected
[c7] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
[c7] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3
[c7] xhci-hcd xhci-hcd.2.auto: irq 104, io mem 0x12000000
[c7] xHCI xhci_add_endpoint called for root hub
[c7] xHCI xhci_check_bandwidth called for root hub
[c7] hub 3-0:1.0: USB hub found
[c7] hub 3-0:1.0: 1 port detected
[c7] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
[c7] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4
[c7] xHCI xhci_add_endpoint called for root hub
[c7] xHCI xhci_check_bandwidth called for root hub
[c7] hub 4-0:1.0: USB hub found
[c7] hub 4-0:1.0: 1 port detected
[c7] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
[c7] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 5
[c7] xhci-hcd xhci-hcd.5.auto: irq 105, io mem 0x12400000
[c7] xHCI xhci_add_endpoint called for root hub
[c7] xHCI xhci_check_bandwidth called for root hub
[c7] hub 5-0:1.0: USB hub found
[c7] hub 5-0:1.0: 1 port detected
[c7] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
[c7] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 6
[c7] xHCI xhci_add_endpoint called for root hub
[c7] xHCI xhci_check_bandwidth called for root hub
[c7] hub 6-0:1.0: USB hub found
[c7] hub 6-0:1.0: 1 port detected
[c7] usbcore: registered new interface driver usb-storage
[c7] usbcore: registered new interface driver usbserial
[c7] usbcore: registered new interface driver usbserial_generic
[c7] of_get_named_gpio_flags: can't parse gpios property
[c7] exynos-usb-switch usb-switch.10: host detect gpio is not available
[c7] of_get_named_gpio_flags: can't parse gpios property
[c7] exynos-usb-switch usb-switch.10: device detect gpio is not available
[c7] of_get_named_gpio_flags: can't parse gpios property
[c7] exynos-usb-switch usb-switch.10: vbus control gpio is not available
[c7] exynos-usb-switch usb-switch.10: failed to configure pins
[c7] exynos-usb-switch usb-switch.10: udc device is not available
[c7] exynos-usb-switch usb-switch.10: Disable device detect IRQ
[c7] usb cable = 1
[c7] mousedev: PS/2 mouse device common for all mice
[c7] s2m-rtc s2m-rtc: s2m_rtc_enable_wtsr: enable WTSR
[c7] s2m-rtc s2m-rtc: s2m_rtc_enable_smpl: enable SMPL
[c7] s2m_rtc_enable_smpl: WTSR_SMPL(0xc7)
[c7] s2m-rtc s2m-rtc: rtc core: registered s2m-rtc as rtc0
[c7] i2c /dev entries driver
[c7] IR NEC protocol handler initialized
[c7] IR RC5(x) protocol handler initialized
[c7] IR RC6 protocol handler initialized
[c7] IR JVC protocol handler initialized
[c7] IR Sony protocol handler initialized
[c7] IR RC5 (streamzap) protocol handler initialized
[c7] IR SANYO protocol handler initialized
[c7] IR MCE Keyboard/mouse protocol handler initialized
[c7] PM DOMAIN: pd-mfc, Device : 11000000.mfc Registered
[c7] s5p-mfc 11000000.mfc: exynos-iommu gpd_dev_ops inserted!
[c7] s5p-mfc 11000000.mfc: s5p_mfc_probe()
[c7] s5p-mfc 11000000.mfc: of alias get id : mfc-0
[c7] s5p-mfc 11000000.mfc: decoder registered as /dev/video6
[c7] s5p-mfc 11000000.mfc: encoder registered as /dev/video7
[c7] s5p-mfc 11000000.mfc: IOVMM: IOVM SIZE = 0x40000000 B, IOVMM from 0x10000000.
[c7] s5p-mfc 11000000.mfc: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0x50000000.
[c7] s5p-mfc 11000000.mfc: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0x70000000.
[c7] s5p-mfc 11000000.mfc: IOVMM: IOVM SIZE = 0x30000000 B, IOVMM from 0x80000000.
[c7] s5p-mfc 11000000.mfc: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0xb0000000.
[c7] s5p-mfc 11000000.mfc: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0xd0000000.
[c7] ion_cma ion_mfc_nfw: Alread isolated!
[c7] s5p_mfc_probe--
[c7] S5P CEC for Exynos4 Driver, (c) 2009 Samsung Electronics
[c7] of_get_named_gpio_flags exited with status 38
[c7] s5p-tvout-cec 101b0000.cec: success request GPIO for hdmi-cec
s5p-tvout-cec 101b0000.cec: probe successful
[c7] TRIMINFO[0] = 0x806c34
[c7] TMU_CONTROL[0] = 0x10609803
[c7] CURRENT_TEMP[0] = 0x39
[c7] THRESHOLD_TEMP_RISE[0] = 0x89847f7a
[c7] THRESHOLD_TEMP_FALL[0] = 0x87827d78
[c7] INTEN[0] = 0x11111111
[c7] INTCLEAR[0] = 0x0
[c7] TRIMINFO[1] = 0x80692e
[c7] TMU_CONTROL[1] = 0x10609803
[c6] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[c7] CURRENT_TEMP[1] = 0x37
[c7] THRESHOLD_TEMP_RISE[1] = 0x837e7974
[c7] THRESHOLD_TEMP_FALL[1] = 0x817c7772
[c7] INTEN[1] = 0x11111111
[c7] INTCLEAR[1] = 0x0
[c7] TRIMINFO[2] = 0x806329
[c6] hub 3-1:1.0: USB hub found
[c6] hub 3-1:1.0: 2 ports detected
[c7] TMU_CONTROL[2] = 0x10609803
[c7] CURRENT_TEMP[2] = 0x36
[c7] THRESHOLD_TEMP_RISE[2] = 0x827d7873
[c7] THRESHOLD_TEMP_FALL[2] = 0x807b7671
[c7] INTEN[2] = 0x11111111
[c7] INTCLEAR[2] = 0x0
[c7] TRIMINFO[3] = 0x80672d
[c7] TMU_CONTROL[3] = 0x10609803
[c7] CURRENT_TEMP[3] = 0x3b
[c7] THRESHOLD_TEMP_RISE[3] = 0x89847f7a
[c7] THRESHOLD_TEMP_FALL[3] = 0x87827d78
[c7] INTEN[3] = 0x11111111
[c7] INTCLEAR[3] = 0x0
[c7] TRIMINFO[4] = 0x806e34
[c7] TMU_CONTROL[4] = 0x10609803
[c7] CURRENT_TEMP[4] = 0x2d
[c7] THRESHOLD_TEMP_RISE[4] = 0x7e79746f
[c7] THRESHOLD_TEMP_FALL[4] = 0x7c77726d
[c7] INTEN[4] = 0x11111111
[c7] INTCLEAR[4] = 0x0
[c7] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled
[c7] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[c6] usb 4-1: new SuperSpeed USB device number 2 using xhci-hcd
[c7] cpuidle: using governor ladder
[c6] usb 4-1: Parent hub missing LPM exit latency info. Power management will be impacted.
[c6] hub 4-1:1.0: USB hub found
[c6] hub 4-1:1.0: 2 ports detected
[c7] cpuidle: using governor menu
[c7] Synopsys Designware Multimedia Card Interface Driver
[c7] dwmmc_exynos 12200000.dwmmc0: Clock pin control Pin:gpc0-0 Addr:13410000.pinctrl Val:3 Num:4
of_get_named_gpio_flags exited with status 69
[c7] dwmmc_exynos 12200000.dwmmc0: dw_mci_parse_dt : emmc h/w reset gpio[69] notifier registered.
[c7] dwmmc_exynos 12200000.dwmmc0: Using internal DMA controller.
[c7] dwmmc_exynos 12200000.dwmmc0: FIFOTH: 0x 300f0030
dwmmc_exynos 12200000.dwmmc0: Version ID is 250a
[c7] dwmmc_exynos 12200000.dwmmc0: DW MMC controller at irq 107, 64 bit host data width, 64 deep fifo
[c7] mmc_host mmc0: Bus speed (slot 0) = 20812500Hz (slot req 400000Hz, actual 385416HZ div = 27)
[c7] dwmmc_exynos 12200000.dwmmc0: 1 slots initialized
[c7] dwmmc_exynos 12220000.dwmmc2: Clock pin control Pin:gpc2-0 Addr:13410000.pinctrl Val:3 Num:3
of_get_named_gpio_flags: can't parse gpios property
[c7] dwmmc_exynos 12220000.dwmmc2: Using internal DMA controller.
[c7] dwmmc_exynos 12220000.dwmmc2: FIFOTH: 0x 300f0030
dwmmc_exynos 12220000.dwmmc2: Version ID is 250a
[c4] mmc_host mmc0: Bus speed (slot 0) = 20812500Hz (slot req 300000Hz, actual 297321HZ div = 35)
[c7] dwmmc_exynos 12220000.dwmmc2: DW MMC controller at irq 109, 64 bit host data width, 64 deep fifo
[c7] mmc1: vmmc regulator found
[c7] mmc1: vqmmc regulator found
[c4] mmc_host mmc0: Bus speed (slot 0) = 20812500Hz (slot req 200000Hz, actual 196344HZ div = 53)
[c5] usb 2-1: new full-speed USB device number 2 using exynos-ohci
[c7] mmc_host mmc1: Bus speed (slot 0) = 20812500Hz (slot req 400000Hz, actual 385416HZ div = 27)
[c7] dwmmc_exynos 12220000.dwmmc2: 1 slots initialized
[c7] leds-gpio leds.15: pins are not configured from the driver
[c7] of_get_named_gpio_flags exited with status 205
[c7] of_get_named_gpio_flags exited with status 204
[c7] of_get_named_gpio_flags exited with status 27
[c7] of_get_named_gpio_flags exited with status 205
[c7] of_get_named_gpio_flags exited with status 204
[c7] of_get_named_gpio_flags exited with status 27
[c7] ledtrig-cpu: registered to indicate activity on CPUs
[c7] S5P ACE Driver(SLIMSSS), (c) 2013 Samsung Electronics
[c7] ACE: ecb-aes-s5p-ace
[c7] ACE: cbc-aes-s5p-ace
[c7] ACE: ctr-aes-s5p-ace
[c7] ACE: xts-aes-s5p-ace
[c7] ACE: sha1-s5p-ace
[c7] ACE: sha256-s5p-ace
[c7] ACE driver is initialized
[c7] hidraw: raw HID events driver (C) Jiri Kosina
[c7] usbcore: registered new interface driver usbhid
[c7] usbhid: USB HID core driver
[c7] exynos-adc 12d10000.adc: operating without regulator vdd[-19]
[c7] exynos-adc 12d10000.adc: Probed successfully driver.
[c7] odroid-fan odroid_fan.14: unable to request PWM, trying legacy API
[c7] pwm-samsung: tin parent at 66600000
[c7] of_get_named_gpio_flags exited with status 34
[c7] lpass_register_subip: i2s(de336c10) registered
[c6] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-12120000.usb-1/input2
[c4] mmc_host mmc0: Bus speed (slot 0) = 20812500Hz (slot req 100000Hz, actual 99107HZ div = 105)
[c0] input: Logitech Unifying Device. Wireless PID:4024 as /devices/12120000.usb/usb2/2-1/2-1:1.2/0003:046D:C52B.0003/input/input0
[c0] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4024] on usb-12120000.usb-1:1
[c6] usb 6-1: new SuperSpeed USB device number 2 using xhci-hcd
[c6] usb 6-1: Parent hub missing LPM exit latency info. Power management will be impacted.
[c4] mmc_host mmc1: Bus speed (slot 0) = 166500000Hz (slot req 400000Hz, actual 398325HZ div = 209)
[c4] mmc_host mmc1: Bus speed (slot 0) = 166500000Hz (slot req 166500000Hz, actual 166500000HZ div = 0)
[c0] dwmmc_exynos 12220000.dwmmc2: Start bit error (status=00002000)
[c4] mmc_host mmc1: Tuning error: cmd.error:0, data.error:-5
[c4] dwmmc_exynos 12220000.dwmmc2: divratio: 3 map: 0x 0000fffe
[c4] dwmmc_exynos 12220000.dwmmc2: sample_good: 0x fffe best_sample: 0x 07
[c6] usb 4-1.1: new SuperSpeed USB device number 3 using xhci-hcd
[c6] usb 4-1.1: Parent hub missing LPM exit latency info. Power management will be impacted.
[c6] usb-storage 4-1.1:1.0: USB Mass Storage device detected
[c6] scsi0 : usb-storage 4-1.1:1.0
[c4] mmc1: new ultra high speed SDR104 SDXC card at address 59b4
[c5] mmcblk0: mmc1:59b4 MS 60.3 GiB
[c5] mmcblk0: p1 p2 p3
[c5] mmc_host mmc0: Bus speed (slot 0) = 20812500Hz (slot req 400000Hz, actual 385416HZ div = 27)
[c6] usb 6-1: reset SuperSpeed USB device number 2 using xhci-hcd
[c6] usb 6-1: Parent hub missing LPM exit latency info. Power management will be impacted.
[c5] mmc_host mmc0: Bus speed (slot 0) = 20812500Hz (slot req 300000Hz, actual 297321HZ div = 35)
[c6] xhci-hcd xhci-hcd.5.auto: xHCI xhci_drop_endpoint called with disabled ep de373a80
[c6] xhci-hcd xhci-hcd.5.auto: xHCI xhci_drop_endpoint called with disabled ep de373aac
[c6] xhci-hcd xhci-hcd.5.auto: xHCI xhci_drop_endpoint called with disabled ep de373ad8
[c5] mmc_host mmc0: Bus speed (slot 0) = 20812500Hz (slot req 200000Hz, actual 196344HZ div = 53)
[c6] r8152 6-1:1.0 eth0: v2.05.0 (2015/06/09)
[c6] r8152 6-1:1.0 eth0: This product is covered by one or more of the following patents:
US6,570,884, US6,115,776, and US6,327,625.
[c5] mmc_host mmc0: Bus speed (slot 0) = 20812500Hz (slot req 100000Hz, actual 99107HZ div = 105)
[c7] exynos5-hsi2c 12cb0000.hsi2c: Register dump(suspended : 0)
: CTL 0x00000089
: FIFO_CTL 0x00200203
: TRAILING_CTL 0x0000000f
: CLK_CTL 0x00000000
: CLK_SLOT 0x00000000
: INT_EN 0x00000000
: INT_STAT 0x00000000
: ERR_STAT 0x00000000
: FIFO_STAT 0x01000002
: TXDATA 0xdeadbeaf
: RXDATA 0x00000000
: CONF 0xb00300ff
: AUTO_CONF 0x00020002
: TIMEOUT 0x000000ff
: MANUAL_CMD 0x00000000
: TRANS_STAT 0x00000000
: TIMING_HS1 0x4b4b4b00
: TIMING_HS2 0x25004b4b
: TIMING_HS3 0x00000096
: TIMING_FS1 0x4b4b4b00
: TIMING_FS2 0x25004b4b
: TIMING_FS3 0x00000096
: TIMING_SLA 0x00000025
: ADDR 0x00004000
[c7] exynos5-hsi2c 12cb0000.hsi2c: tx timeout
[c6] scsi 0:0:0:0: Direct-Access KINGSTON SV300S37A60G 1003 PQ: 0 ANSI: 6
[c6] sd 0:0:0:0: Attached scsi generic sg0 type 0
[c5] sd 0:0:0:0: [sda] 117231392 512-byte logical blocks: (60.0 GB/55.8 GiB)
[c5] sd 0:0:0:0: [sda] Write Protect is off
[c5] sd 0:0:0:0: [sda] Mode Sense: 5f 00 10 08
[c5] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[c5] sda: sda1 sda2
[c5] sd 0:0:0:0: [sda] Attached SCSI disk
[c7] exynos5-hsi2c 12cb0000.hsi2c: Register dump(suspended : 0)
: CTL 0x00000089
: FIFO_CTL 0x00200203
: TRAILING_CTL 0x0000000f
: CLK_CTL 0x00000000
: CLK_SLOT 0x00000000
: INT_EN 0x00000000
: INT_STAT 0x00000000
: ERR_STAT 0x00000000
: FIFO_STAT 0x01000002
: TXDATA 0xdeadbeaf
: RXDATA 0x00000000
: CONF 0xb00300ff
: AUTO_CONF 0x00020002
: TIMEOUT 0x000000ff
: MANUAL_CMD 0x00000000
: TRANS_STAT 0x00000000
: TIMING_HS1 0x4b4b4b00
: TIMING_HS2 0x25004b4b
: TIMING_HS3 0x00000096
: TIMING_FS1 0x4b4b4b00
: TIMING_FS2 0x25004b4b
: TIMING_FS3 0x00000096
: TIMING_SLA 0x00000025
: ADDR 0x00004000
[c7] exynos5-hsi2c 12cb0000.hsi2c: tx timeout
[c7] exynos5-hsi2c 12cb0000.hsi2c: xfer message failed
[c7] max98090 1-0010: Failed to reset codec: -5
[c7] max98090 1-0010: Failed to device reset : -5
[c7] max98090 1-0010: ASoC: failed to probe CODEC -5
[c7] odroid-audio sound.13: ASoC: failed to instantiate card -5
[c7] odroid-audio sound.13: snd_soc_register_card() failed(max98090): -5
[c7] dummy-codec dummy-codec.11: ASoC: Failed to create Capture debugfs file
[c7] dummy-codec dummy-codec.11: ASoC: Failed to create Playback debugfs file
[c7] dummy-codec dummy-codec.11: ASoC: Failed to create Capture debugfs file
[c7] dummy-codec dummy-codec.11: ASoC: Failed to create Playback debugfs file
[c7] dummy-codec dummy-codec.11: ASoC: Failed to create Capture debugfs file
[c7] dummy-codec dummy-codec.11: ASoC: Failed to create Playback debugfs file
[c7] odroid-audio sound.13: dummy-aif1 samsung-i2s-sec mapping ok
[c7] odroid-audio sound.13: dummy-aif2 3830000.i2s mapping ok
[c7] Netfilter messages via NETLINK v0.30.
[c7] arp_tables: (C) 2002 David S. Miller
[c7] TCP: cubic registered
[c7] Initializing XFRM netlink socket
[c7] NET: Registered protocol family 10
[c7] mip6: Mobile IPv6
[c7] sit: IPv6 over IPv4 tunneling driver
[c7] NET: Registered protocol family 17
[c7] NET: Registered protocol family 15
[c7] NET: Registered protocol family 35
[c7] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
[c7] Registering SWP/SWPB emulation handler
[c7] SRAM ASV group [4] : MIF(925000), G3D(950000)
[c7] registered taskstats version 1
[c7] MAIN_DC: disabling
[c7] regulator-dummy: disabling
[c7] of_get_named_gpio_flags exited with status 11
[c7] gpiod_set_debounce: gpio-11 status -22
[c7] input: gpio_keys.7 as /devices/gpio_keys.7/input/input1
[c7] s2m-rtc s2m-rtc: setting system clock to 2016-04-29 14:52:27 UTC (1461941547)
[c7] CPUFREQ of CA7 L0 : 1300000 uV
[c7] CPUFREQ of CA7 L0 : ABB 8
[c7] CPUFREQ of CA7 L1 : 1287500 uV
[c7] CPUFREQ of CA7 L1 : ABB 4
[c7] CPUFREQ of CA7 L2 : 1225000 uV
[c7] CPUFREQ of CA7 L2 : ABB 4
[c7] CPUFREQ of CA7 L3 : 1175000 uV
[c7] CPUFREQ of CA7 L3 : ABB 4
[c7] CPUFREQ of CA7 L4 : 1125000 uV
[c7] CPUFREQ of CA7 L4 : ABB 4
[c7] CPUFREQ of CA7 L5 : 1087500 uV
[c7] CPUFREQ of CA7 L5 : ABB 4
[c7] CPUFREQ of CA7 L6 : 1050000 uV
[c7] CPUFREQ of CA7 L6 : ABB 4
[c7] CPUFREQ of CA7 L7 : 1012500 uV
[c7] CPUFREQ of CA7 L7 : ABB 4
[c7] CPUFREQ of CA7 L8 : 975000 uV
[c7] CPUFREQ of CA7 L8 : ABB 255
[c7] CPUFREQ of CA7 L9 : 937500 uV
[c7] CPUFREQ of CA7 L9 : ABB 255
[c7] CPUFREQ of CA7 L10 : 900000 uV
[c7] CPUFREQ of CA7 L10 : ABB 255
[c7] CPUFREQ of CA7 L11 : 900000 uV
[c7] CPUFREQ of CA7 L11 : ABB 255
[c7] CPUFREQ of CA7 L12 : 900000 uV
[c7] CPUFREQ of CA7 L12 : ABB 255
[c7] CPUFREQ of CA7 L13 : 900000 uV
[c7] CPUFREQ of CA7 L13 : ABB 255
[c7] CPUFREQ of CA7 L14 : 900000 uV
[c7] CPUFREQ of CA7 L14 : ABB 255
[c7] kfc clock[800000], mx_mspll clock[666000]
[c7] [SET_EMA_TEST] volt : 887500 value : 0x44
[c7] [SET_EMA_TEST] volt : 937500 value : 0x44
[c7] [SET_EMA_TEST] volt : 1032500 value : 0x33
[c7] [SET_EMA_TEST] volt : 1142500 value : 0x11
[c7] [SET_EMA_TEST] volt : 1167500 value : 0x11
[c7] CPUFREQ of CA15 L0 : 1362500 uV
[c7] CPUFREQ of CA15 L0 : ABB 8
[c7] CPUFREQ of CA15 L1 : 1362500 uV
[c7] CPUFREQ of CA15 L1 : ABB 8
[c7] CPUFREQ of CA15 L2 : 1362500 uV
[c7] CPUFREQ of CA15 L2 : ABB 8
[c7] CPUFREQ of CA15 L3 : 1325000 uV
[c7] CPUFREQ of CA15 L3 : ABB 255
[c7] CPUFREQ of CA15 L4 : 1275000 uV
[c7] CPUFREQ of CA15 L4 : ABB 255
[c7] CPUFREQ of CA15 L5 : 1200000 uV
[c7] CPUFREQ of CA15 L5 : ABB 255
[c7] CPUFREQ of CA15 L6 : 1150000 uV
[c7] CPUFREQ of CA15 L6 : ABB 255
[c7] CPUFREQ of CA15 L7 : 1112500 uV
[c7] CPUFREQ of CA15 L7 : ABB 255
[c7] CPUFREQ of CA15 L8 : 1075000 uV
[c7] CPUFREQ of CA15 L8 : ABB 255
[c7] CPUFREQ of CA15 L9 : 1037500 uV
[c7] CPUFREQ of CA15 L9 : ABB 255
[c7] CPUFREQ of CA15 L10 : 1012500 uV
[c7] CPUFREQ of CA15 L10 : ABB 255
[c7] CPUFREQ of CA15 L11 : 1000000 uV
[c7] CPUFREQ of CA15 L11 : ABB 255
[c7] CPUFREQ of CA15 L12 : 975000 uV
[c7] CPUFREQ of CA15 L12 : ABB 255
[c7] CPUFREQ of CA15 L13 : 950000 uV
[c7] CPUFREQ of CA15 L13 : ABB 255
[c7] CPUFREQ of CA15 L14 : 925000 uV
[c7] CPUFREQ of CA15 L14 : ABB 255
[c7] CPUFREQ of CA15 L15 : 900000 uV
[c7] CPUFREQ of CA15 L15 : ABB 255
[c7] CPUFREQ of CA15 L16 : 900000 uV
[c7] CPUFREQ of CA15 L16 : ABB 255
[c7] CPUFREQ of CA15 L17 : 900000 uV
[c7] CPUFREQ of CA15 L17 : ABB 255
[c7] CPUFREQ of CA15 L18 : 900000 uV
[c7] CPUFREQ of CA15 L18 : ABB 255
[c7] CPUFREQ of CA15 L19 : 900000 uV
[c7] CPUFREQ of CA15 L19 : ABB 255
[c7] CPUFREQ of CA15 L20 : 900000 uV
[c7] CPUFREQ of CA15 L20 : ABB 255
[c7] CPUFREQ of CA15 L21 : 900000 uV
[c7] CPUFREQ of CA15 L21 : ABB 255
[c7] CPUFREQ of CA15 L22 : 900000 uV
[c7] CPUFREQ of CA15 L22 : ABB 255
[c7] eagle clock[800000], mpll clock[800000]
[c7] Exynos: Kernel Thermal management registered
[c7] ### dt-test ### No testcase data in device tree; not running tests
[c7] MIF 825000Khz ASV is 950000uV
[c7] DEVFREQ(MIF) : 825000Khz, ABB 14
[c7] MIF 728000Khz ASV is 912500uV
[c7] DEVFREQ(MIF) : 728000Khz, ABB 14
[c7] MIF 633000Khz ASV is 875000uV
[c7] DEVFREQ(MIF) : 633000Khz, ABB 14
[c7] MIF 543000Khz ASV is 850000uV
[c7] DEVFREQ(MIF) : 543000Khz, ABB 14
[c7] MIF 413000Khz ASV is 787500uV
[c7] DEVFREQ(MIF) : 413000Khz, ABB 14
[c7] MIF 275000Khz ASV is 762500uV
[c7] DEVFREQ(MIF) : 275000Khz, ABB 14
[c7] MIF 206000Khz ASV is 762500uV
[c7] DEVFREQ(MIF) : 206000Khz, ABB 14
[c7] MIF 165000Khz ASV is 762500uV
[c7] DEVFREQ(MIF) : 165000Khz, ABB 14
[c7] MIF 138000Khz ASV is 762500uV
[c7] DEVFREQ(MIF) : 138000Khz, ABB 14
[c7] MIF: set ASV freq 825000, voltage 950000
[c7] INT 600000Khz ASV is 937500uV
[c7] DEVFREQ(INT) : 600000Khz, ABB 255
[c7] PM DOMAIN: Power off unused power domains.
[c7] ALSA device list:
[c7] pd-gscl: Power-off latency exceeded, new value 3219250 ns
[c7] #0: odroid-audio
[c7] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities
[c7] EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities
[c5] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[c5] EXT4-fs (sda1): write access will be enabled during recovery
[c5] EXT4-fs (sda1): recovery complete
[c5] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[c5] VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
[c5] devtmpfs: mounted
[c5] Freeing unused kernel memory: 420K (c08a6000 - c090f000)
[c4] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[c4] systemd[1]: Detected architecture 'arm'.
[c4] systemd[1]: Set hostname to .
[c4] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[c4] systemd[1]: Expecting device dev-ttySAC2.device...
[c4] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[c4] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[c4] systemd[1]: Starting Remote File Systems (Pre).
[c4] systemd[1]: Reached target Remote File Systems (Pre).
[c4] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[c4] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[c4] systemd[1]: Starting Encrypted Volumes.
[c4] systemd[1]: Reached target Encrypted Volumes.
[c4] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[c4] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[c4] systemd[1]: Starting Paths.
[c4] systemd[1]: Reached target Paths.
[c4] systemd[1]: Expecting device dev-sda2.device...
[c4] systemd[1]: Starting Root Slice.
[c4] systemd[1]: Created slice Root Slice.
[c4] systemd[1]: Starting User and Session Slice.
[c5] systemd[1]: Created slice User and Session Slice.
[c5] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[c5] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[c5] systemd[1]: Starting Delayed Shutdown Socket.
[c5] systemd[1]: Listening on Delayed Shutdown Socket.
[c5] systemd[1]: Starting Journal Socket (/dev/log).
[c6] systemd[1]: Listening on Journal Socket (/dev/log).
[c6] systemd[1]: Starting udev Control Socket.
[c6] systemd[1]: Listening on udev Control Socket.
[c6] systemd[1]: Starting udev Kernel Socket.
[c7] systemd[1]: Listening on udev Kernel Socket.
[c7] systemd[1]: Starting Journal Socket.
[c4] systemd[1]: Listening on Journal Socket.
[c4] systemd[1]: Starting System Slice.
[c5] systemd[1]: Created slice System Slice.
[c5] systemd[1]: Starting File System Check on Root Device...
[c6] systemd[1]: Starting system-getty.slice.
[c6] systemd[1]: Created slice system-getty.slice.
[c6] systemd[1]: Starting system-serial\x2dgetty.slice.
[c6] systemd[1]: Created slice system-serial\x2dgetty.slice.
[c6] systemd[1]: Starting Increase datagram queue length...
[c6] systemd[1]: Mounting POSIX Message Queue File System...
[c6] systemd[1]: Mounted Huge Pages File System.
[c5] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[c5] systemd[1]: Mounting Debug File System...
[c5] systemd[1]: Starting Load Kernel Modules...
[c6] systemd[1]: Starting udev Coldplug all Devices...
[c6] systemd[1]: Started Set Up Additional Binary Formats.
[c6] systemd[1]: Starting Slices.
[c4] systemd[1]: Reached target Slices.
[c5] systemd[1]: Mounted Debug File System.
[c5] systemd[1]: Mounted POSIX Message Queue File System.
[c5] systemd[1]: Started File System Check on Root Device.
[c6] systemd[1]: Started Increase datagram queue length.
[c6] systemd[1]: Started Create list of required static device nodes for the current kernel.
[c6] systemd[1]: Started Load Kernel Modules.
[c6] systemd[1]: Starting Apply Kernel Variables...
[c6] systemd[1]: Mounted FUSE Control File System.
[c6] systemd[1]: Mounting Configuration File System...
[c7] systemd[1]: Starting Create Static Device Nodes in /dev...
[c5] systemd[1]: Starting Syslog Socket.
[c7] systemd[1]: Listening on Syslog Socket.
[c7] systemd[1]: Starting Journal Service...
[c6] systemd[1]: Started Journal Service.
[c5] EXT4-fs (sda1): re-mounted. Opts: (null)
[c5] systemd-udevd[185]: starting version 215
[c4] [d:0, c:0] s5p_mfc_open:1629: NORMAL instance is opened [0:1]
[c4] [d:0] s5p_mfc_alloc_firmware:122: Port for DRM F/W : 0xafc00000
[c4] [d:0] s5p_mfc_init_memctrl:304: [1] Base Address : 10000000
[c4] [d:0] mfc_init_hw:426: MFC v8.0, F/W: 14yy, 01mm, 13dd (D)
[c4] [d:0, c:0] s5p_mfc_open:1725: MFC open completed [0:1] dev = dd824010, ctx = dd9f5800
[c7] [d:0, c:1] s5p_mfc_open:1629: NORMAL instance is opened [0:2]
[c7] [d:0, c:1] s5p_mfc_open:1725: MFC open completed [0:2] dev = dd824010, ctx = ddb83000
[c7] [d:0, c:1] s5p_mfc_release:1883: MFC driver release is called [0:2], is_drm(0)
[c7] [d:0] s5p_mfc_release:2037: mfc driver release finished [0:1], dev = dd824010
[c6] [d:0, c:0] s5p_mfc_release:1883: MFC driver release is called [0:1], is_drm(0)
[c6] s5p_mfc_dev_release:1801: power off
[c2] INA231 3-0040: I2C write error: (-6) reg: 0x0
[c5] INA231 3-0040: ============= Probe INA231 Fail! : sensor_arm (0xFFFFFFFA) =============
[c5] INA231 3-0041: I2C write error: (-6) reg: 0x0
[c5] INA231 3-0041: ============= Probe INA231 Fail! : sensor_mem (0xFFFFFFFA) =============
[c5] INA231 3-0044: I2C write error: (-6) reg: 0x0
[c5] INA231 3-0044: ============= Probe INA231 Fail! : sensor_g3d (0xFFFFFFFA) =============
[c5] INA231 3-0045: I2C write error: (-6) reg: 0x0
[c5] INA231 3-0045: ============= Probe INA231 Fail! : sensor_kfc (0xFFFFFFFA) =============
[c5] i2c-core: driver [INA231] using legacy suspend method
[c5] i2c-core: driver [INA231] using legacy resume method
[c6] [d:0] s5p_mfc_release:2037: mfc driver release finished [0:0], dev = dd824010
[c7] s3c64xx-spi 12d30000.spi: spi bus clock parent not specified, using clock at index 0 as parent
[c7] s3c64xx-spi 12d30000.spi: number of chip select lines not specified, assuming 1 chip select line
[c7] of_get_named_gpio_flags exited with status 190
[c0] PM DOMAIN: pd-isp, Device : 131a0000.spi Registered
[c0] s3c64xx-spi 131a0000.spi: spi bus clock parent not specified, using clock at index 0 as parent
[c0] s3c64xx-spi 131a0000.spi: number of chip select lines not specified, assuming 1 chip select line
[c0] PM DOMAIN: pd-isp, Device : 131b0000.spi Registered
[c0] s3c64xx-spi 131b0000.spi: spi bus clock parent not specified, using clock at index 0 as parent
[c0] s3c64xx-spi 131b0000.spi: number of chip select lines not specified, assuming 1 chip select line
[c1] systemd-journald[178]: Received request to flush runtime journal from PID 1
[c5] Adding 8262044k swap on /dev/sda2. Priority:-1 extents:1 across:8262044k
[c5] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[c0] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[c5] Unhandled fault: imprecise external abort (0x1406) at 0x00000000
[c5] Unhandled fault: imprecise external abort (0x1406) at 0x00000000
[c5] Unhandled fault: imprecise external abort (0x1406) at 0x00000000
[c5] Unhandled fault: imprecise external abort (0x1406) at 0x00000000
[c5] Unhandled fault: imprecise external abort (0x1406) at 0x00000000
[c5] Unhandled fault: imprecise external abort (0x1406) at 0x00000000
[c5] Unhandled fault: imprecise external abort (0x1406) at 0x00000000
[c5] Unhandled fault: imprecise external abort (0x1406) at 0x00000000
[c5] Unhandled fault: imprecise external abort (0x1406) at 0x00000000
[c5] Unhandled fault: imprecise external abort (0x1406) at 0x00000000
[c0] LCD is on
[c4] Alignment trap: not handling instruction f462ea6d at []
[c4] Unhandled fault: alignment exception (0x011) at 0xabe0d418
[c7] Alignment trap: not handling instruction f462ea6d at []
[c7] Unhandled fault: alignment exception (0x011) at 0xabe2b418
[c6] Alignment trap: not handling instruction f462ea6d at []
[c6] Unhandled fault: alignment exception (0x011) at 0xabe90418
[c5] Alignment trap: not handling instruction f462ea6d at []
[c5] Unhandled fault: alignment exception (0x011) at 0xabe09418
[c4] Alignment trap: not handling instruction f462ea6d at []
[c4] Unhandled fault: alignment exception (0x011) at 0xabe94418